SOONTAI - IEC-F type High Pass Filter (Excellent, Up to 1GHz)

CATV - Satellite - DOCSIS - MoCA - High Performance Accessories




IEC-F Series High Pass Filter

Features

* Small and Light Weight

* SMD, High Stability

* Wide Band, Up to 1GHz

* Standard Rejection 45dB

* Low Loss

* Excellent Return Loss

* Suitable for CATV, Cablenet
and other communication systems

Introduction

This is our IEC to F type connector High Pass Filter series with a 90 degree housing.
It has excellent specifications, dimensions of only 12(D) x 25(W) x 37(L) mm and a weight
of only 18g.

It is most suitable for use in many communications applications, such as CATV, Cablenet and other RF systems.

The electrical features are listed below.

1. Rejection better than 40dB.

2. Lowest insertion loss, signal-through-loss reduced to a minimum.

3. Excellent return loss, good impedance match reduces signal loss to
keep the signal clean. (see figure)

**Items**
Model	Pass Band	Model	Pass Band
IE HF - 15R/F	15 - 1000 MHz	IE HF - 43R/F	43 - 1000 MHz
IE HF - 18R/F	18 - 1000 MHz	IE HF- 50R/F	50 - 1000 MHz
IE HF - 20R/F	20 - 1000 MHz	IE HF - 54R/F	54 - 1000 MHz
IE HF - 25R/F	25 - 1000 MHz	IE HF - 65R/F	65 - 1000 MHz
IE HF - 30R/F	30 - 1000 MHz	IE HF - 70R/F	70 - 1000 MHz
IE HF - 35R/F	35 - 1000 MHz	IE HF - 80R/F	80 - 1000 MHz
IE HF - 40R/F	40 - 1000 MHz	IE HF - 85R/F	85 - 1000 MHz

**Electrical Curve** (IE HF-85R/F )
Insertion Loss \| Return Loss SPAN 200MHz Fig 1	Insertion Loss \| Return Loss SPAN 1000MHz Fig 2

**General Specifications**
Item	IE HF - 85R/F
Impedance	75 ohm
Pass Band	85 - 1000MHz
Insertion Loss	0.5dB (typ) / 2.0dB (max)
Return Loss	20dB (typ) / 12dB (min)
Stop Band	5 - 65MHz
Rejection ( 5-63MHz)	45dB (typ) / 40dB (min)
Dimensions	12(D) x 25(W) x 37(L) mm
Net Weight	18g

* Specifications are subject to change without notice.

Home | Products | Show Room | Servic Ccenter

SOONTAI TECH CO., LTD.
No.43, Huangong Rd., Yung Kang District, Tainan City 71041, Taiwan
TEL: 886-6-2016969 FAX: 886-6-2013939 E-mail:soontai@soontai.com